SPORTident Readout for *Manager
Programm: SPORTIDENT readout
Versioon: 0.0 2014.xx.xxx
Kuupäev: 01.08.2014 (Tarmo Klaar)
-
This is program for reading data from SPORTIdent cards. Programm supports all cards (SI-5, SI-6, SI-8, SI-9, SI-10, SI-11, SI-Air (AC), SI-pCard, SI-tCard, SI-fCard)

Start program SIReadout.exe.
Enter Server IP address and port (default port is 6001). Test connection between server and SIReadout pressing Test connection button.
Select SI station serial port and speed (if SI master station using 38400 speed – select “BSM7 38400”).
Check „Auto Start“ to automatically start readout procedure
SIME support for open Courses - (optional) check this if you need results file for Open course in SIME format.
Multi SI-Chip support - (optional) check this if runner have more than 1 card to readout full course (very long events or when course have more controls than cards memory can store).
To print out results sheets for runner select „Print result“
Select printer (defined in Windows Printers list) and layout driver according your printer.
Label for stand - small printout to put on resuls stand
If you like to print out speed, select min/km or km/h (distances between controls had to be defined in course descriptions)
To start readout press Start button
If you haven't chek Auto start - select Serial port where SI station is connected and press START
Insert SI cards into SI reader
If connection with *Manager was successful program will printout results.
From menu „Reprint“ you can print out last results sheet
SI Readout stores all raw data from SI cards into SSD files (file name includes readout date). You can use this file after event or when you have (temporary) network problems - choose from menu Backup→ From file→ select SSD file (make copy from active SSD file first) → press Read button → Select SI cards you need to (re)import into event program –> OK
You can read backup data stored in SI station memory :: Backup→ Read from memory