• Programm: SPORTIDENT readout
• Versioon: 0.0 2014.xx.xxx
• Kuupäev: 01.08.2014 (Tarmo Klaar)
• Koduleht: http://www.tak-soft.com

This is program for reading data from SPORTIdent cards. Programm supports all cards (SI-5, SI-6, SI-8, SI-9, SI-10, SI-11, SI-Air (AC), SI-pCard, SI-tCard, SI-fCard)

Start program SIReadout.exe.

• Enter Server IP address and port (default port is 6001). Test connection between server and SIReadout pressing Test connection button.
• Select SI station serial port and speed (if SI master station using 38400 speed – select “BSM7 38400”).
• Check „Auto Start“ to automatically start readout procedure
• SIME support for open Courses - (optional) check this if you need results file for Open course in SIME format.
• Multi SI-Chip support - (optional) check this if runner have more than 1 card to readout full course (very long events or when course have more controls than cards memory can store).
• To print out results sheets for runner select „Print result“
  • Select printer (defined in Windows Printers list) and layout driver according your printer.
  • Label for stand - small printout to put on resuls stand
  • If you like to print out speed, select min/km or km/h (distances between controls had to be defined in course descriptions)
• To start readout press Start button
• If you haven't chek Auto start - select Serial port where SI station is connected and press START
• Insert SI cards into SI reader
• If connection with *Manager was successful program will printout results.
  • Possible errors:
    • Card not found - check card number in *Manager
    • Course or starttime not found - check runners class and course in *Manager
• From menu „Reprint“ you can print out last results sheet
• SI Readout stores all raw data from SI cards into SSD files (file name includes readout date). You can use this file after event or when you have (temporary) network problems - choose from menu Backup→ From file→ select SSD file (make copy from active SSD file first) → press Read button → Select SI cards you need to (re)import into event program –> OK
• You can read backup data stored in SI station memory :: Backup→ Read from memory