Kasutaja tarvikud

Lehe tööriistad


osport:sireadouteng

See on dokumendi vana versioon!


SPORTident Readout for *Manager

  • Programm: SPORTIDENT readout
  • Versioon: 0.0 2014.xx.xxx
  • Kuupäev: 01.08.2014 (Tarmo Klaar)

This is program for reading data from SPORTIdent cards. Programm supports all cards (SI-5, SI-6, SI-8, SI-9, SI-10, SI-11, SI-Air (AC), SI-pCard, SI-tCard, SI-fCard)

Start program SIReadout.exe rom_image008.jpg

  • Enter Server IP address and port (default port is 6001). Test connection between server and SIReadout pressing Test connection button.
  • Select SI station serial port and speed (if SI master station using 38400 speed – select “BSM7 38400”).
  • Check „Auto Start“ to automatically start readout procedure
  • SIME support for open Courses - (optional) check this if you need results file for Open course in SIME format.
  • Multi SI-Chip support - (optional) check this if runner have more than 1 card to readout full course (very long events or when course have more controls than cards memory can store).
  • To print out results sheets for runner select „Print result“
    • Select printer (defined in Windows Printers list) and layout driver according your printer.
    • Label for stand - small printout to put on resuls stand
    • If you like to print out speed, select min/km or km/h (distances between controls had to be defined in course descriptions)
  • To start readout press Start button
  • If you haven't chek Auto start - select Serial port where SI station is connected and press START
  • Insert SI cards into SI reader
  • If connection with *Manager was successful program will printout results.
    • Possible errors:
      • Card not found - check card number in *Manager
      • Course or starttime not found - check runners class and course in *Manager
  • From menu „Reprint“ you can print out last results sheet
  • SI Readout stores all raw data from SI cards into SSD files (file name includes readout date). You can use this file after event or when you have (temporary) network problems - choose from menu Backup→ From file→ select SSD file (make copy from active SSD file first) → press Read button → Select SI cards you need to (re)import into event program –> OK
  • You can read backup data stored in SI station memory :: Backup→ Read from memory
osport/sireadouteng.1407930244.txt.gz · Viimati muutnud: 2016/03/01 16:31 (väline muutmine)