Kasutaja tarvikud

Lehe tööriistad


osport:sireadouteng

Erinevused

Siin näed erinevusi valitud versiooni ja hetkel kehtiva lehekülje vahel.

Lõlita võrdlemise vaatele

Next revision
Previous revision
osport:sireadouteng [2012/03/08 13:50]
taksoft tekitatud
osport:sireadouteng [2016/03/01 16:34] (Hetkel kehtiv)
Rida 1: Rida 1:
 ====== SPORTident Readout for *Manager  ====== ====== SPORTident Readout for *Manager  ======
   * Programm: ** SPORTIDENT readout **   * Programm: ** SPORTIDENT readout **
-  * Versioon: 0.0 2012.06.xxx +  * Versioon: 0.0 2014.xx.xxx 
-  * Kuupäev: 01.03.2012 (Tarmo Klaar)+  * Kuupäev: 01.08.2014 (Tarmo Klaar)
   * Koduleht: http://www.tak-soft.com    * Koduleht: http://www.tak-soft.com 
  
-Start program SIReadout.exe +This is program for reading data from SPORTIdent cardsProgramm supports all cards (SI-5, SI-6, SI-8, SI-9, SI-10, SI-11, SI-Air (AC), SI-pCard, SI-tCard, SI-fCard) 
- {{ROM_image008.jpg?168x275}}+ 
 + 
 + {{ROM_image008.jpg?168x275}}\\ 
 +Start program SIReadout.exe. 
 + 
     * Enter Server IP address and port (default port is 6001). Test connection between server and SIReadout pressing Test connection button.     * Enter Server IP address and port (default port is 6001). Test connection between server and SIReadout pressing Test connection button.
     * Select SI station serial port and speed (if SI master station using 38400 speed -- select “BSM7 38400”).     * Select SI station serial port and speed (if SI master station using 38400 speed -- select “BSM7 38400”).
-    * Select printer and layout driver. +    * Check "Auto Start" to automatically start readout procedure  
-    * If you like to print out speed, select min/km or km/h +    * SIME support for open Courses - (optional) check this if you need results file for Open course in SIME format. 
-    * To start readout press Start button+    * Multi SI-Chip support - (optional) check this if runner have more than 1 card to readout full course (very long events or when course have more controls than cards memory can store). 
 +    * To print out results sheets for runner select "Print result" 
 +      * Select printer (defined in Windows Printers list) and layout driver according your printer
 +      * Label for stand - small printout to put on resuls stand 
 +      * If you like to print out speed, select min/km or km/h (distances between controls had to be defined in course descriptions) 
 +  * To start readout press **Start button** 
 +    * If you haven't chek Auto start - select Serial port where SI station is connected and press START 
 +    * Insert SI cards into SI reader 
 +    * If connection with *Manager was successful program will printout results.  
 +      * Possible errors: 
 +        * Card not found - check card number in *Manager 
 +        * Course or starttime not found - check runners class and course in *Manager 
 +    * From menu "Reprint" you can print out last results sheet 
 +    * SI Readout stores all raw data from SI cards into SSD files (file name includes readout date). You can use this file after event or when you have (temporary) network problems  - choose from menu Backup-> From file-> select SSD file (make copy from active SSD file first) -> press Read button -> Select SI cards you need to (re)import into event program --> OK 
 +    * You can read backup data stored in SI station memory :: Backup-> Read from memory 
  
osport/sireadouteng.1331214640.txt.gz · Viimati muutnud: 2016/03/01 16:31 (väline muutmine)